Victron Energy EasySolar-II 48V 5000VA 70A 50A MPPT 250/100 GX – PMP482507010 foxessinverter

Victron Energy EasySolar-II 48V 5000VA 70A 50A MPPT 250/100 GX – PMP482507010 foxessinverterFeatures The all in one solar power solution The Victron EasySolar II GX integrates the following elements: A MultiPlus II inverter charger A SmartSolar MPPT Tr solar charge controller A GX device with a 2 x 16 character display These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and wifi The display reads battery, inverter and solar charge controller parameters. The

Every solar PV system requires at least one DC disconnector to isolate the PV array from the input to the inverter and at least one AC disconnector to isolate the inverter from the mains supply

The second output is live only when AC is available on the input of the MultiPlus

Manufacturer Part Number LYN040102100

Color Control GX provides an instant overview of your system: battery state of charge

Dimensions (mm) (H x W x D)      629 x 647 x 252

DC Shutdown Voltage: 160 V

This is important in case of Li-ion batteries

Failure modes of flat plate VRLA lead acid batteries in case of intensive cycling

A SmartSolar MPPT -Tr solar charge controller

Part No: MYEN-TAMPERKIT-2

the remote on/off of an electronic load switch (Battery Protect)

Connecting the ground wire of the shore-side supply to the metal parts of the boat will result in galvanic corrosion (see below)